Automatic Parts Washers: Aaladin 2000 Series

2000-products2000-Inside-Washing

When choosing an automatic parts washer (APW), invest in a system that's proven to be the best. That's why we've chosen to distribute Aaladin's automatic parts washers. From the start, Aaladin's number one objective has been to design and perfect the best quality automatic parts washers available. Each unit is manufactured in North American, with impeccable craftsmanship and the highest quality control standards in the industry. The materials used are second to none, allowing the units to stand the test of time.

Aaladin's automatic parts washers are aqueous based, use no solvents, and are extremely safe for your employees and the environment. These machines pay for themselves by saving tremendous amounts of labour and cost.

Built for long life, these quality parts washers, made of 10 or 12 gauge steel, with dual-zone quick service filters, prove to be at the top of their class in performance.

There are five models to chose from in this series of Parts Washers, with gallon capacities ranging in size from 40 gallons to 260 gallons.The 2000 Series has motor horsepower starting at 3, and reaching up to 15, depending on the model chosen.

2040, 2055, 2085, 2175, & 2260 Models

2040205520852000-series2060


 

2040Model 2040 & Model 2040E

Features Include:

  • 40 gallon water capacity
  • 2hp flush seal pump
  • 230 volt 1ph
  • 7kw heater (230v 1ph or 3ph)
  • 12 gauge steel
  • S.S. air shield (door cover)
  • Seal-less ez-load door
  • Quick service fine screen filter
  • Large removable basket
  • 1000lb. load capacity
  • 31" load height
  • 24" turn table
  • 56 - 0° spray jets
  • 40" L x 44" W x 75" H
  • 810 lb. shipping weight
  • ETL & C-ETL Listed
Model20402040E
Water Capacity (Gallons)  40  40
Electrical - Motor  2HP  2HP
Electrical - Voltage  230  210°
Electrical - Phase  1  1
Heaters - 230V 1 PH  STD  STD
Heaters - Kilowatts  7KW  7KW
Heaters - Fused for AMP Draw  45  45
230V 3PH  OPT  OPT
Kilowatts  7KW  7KW
Fused for AMP Draw  40  40
480V 3PH  OPT  OPT
Kilowatts  10KW  10KW
Fused for AMP Draw  25  25
Why Worry About It  OPT  OPT
Gauge Steel  10  10
Stainless Steel Air Shield  STD  STD
Seal-less Door  STD  STD
Oil Skimmer  OPT  STD
Dry Floor Waste Water  N/A  STD
Disposal System Large Basket  STD  STD
NG / LP (Not ETL & CETL Listed)  N/A  N/A
Load Capacity (Pounds)  1,000  1,000
Load Height (Inches)  31"  31"
Turntable Diameter (Inches)  24"  24"
Number of 0° Spray Jets  56  56
Length (Inches)  40"  40"
Width (Inches)  44"  44"
Height (Inches)  75"  75"
Shipping Weight (Pounds)  800  810

 


 

2055Model 2055 & Model 2055E

Features Include:

  • 55 gallon water capacity
  • 3hp seal-less pump
  • 230 volt 1ph
  • 7kw heater (230v 1ph or 3ph)
  • 10 gauge steel
  • S.S. air shield (door cover)
  • Seal-less ez-load door
  • Quick service fine screen filter
  • Large removable basket
  • 1000lb. load capacity
  • 31" load height
  • 24" diameter turntable
  • 56 - 0° spray jets
  • 40" L x 55" W x 75" H
  • 950 lb. shipping weight
  • ETL & C-ETL Listed
Model20552055E
Water Capacity (Gallons)  50  50
Electrical - Motor  3HP  3HP
Electrical - Voltage  230°  230°
Electrical - Phase  1  1
Heaters - 230V 1 PH  STD  STD
Heaters - Kilowatts  7KW  7KW
Heaters - Fused for AMP Draw  45  45
230V 3PH  OPT  OPT
Kilowatts  7KW  7KW
Fused for AMP Draw  40  40
480V 3PH  OPT  OPT
Kilowatts  10KW  10KW
Fused for AMP Draw  25  25
Why Worry About It  OPT  OPT
Gauge Steel  10  10
Stainless Steel Air Shield  STD  STD
Seal-less Door  STD  STD
Oil Skimmer  OPT  STD
Dry Floor Waste Water  N/A  STD
Disposal System Large Basket  STD  STD
NG / LP (Not ETL & CETL Listed)  N/A  N/A
Load Capacity (Pounds)  1,000  1,000
Load Height (Inches)  31"  31"
Turntable Diameter (Inches)  24"  24"
Number of 0° Spray Jets  56  56
Length (Inches)  40"  40"
Width (Inches)  55"  55"
Height (Inches)  75"  75"
Shipping Weight (Pounds)  940  950

 


2085Model 2085E & Model 2085TE

Features Include:

  • Dual zone quick service filters with slide out fine debris screen and small debris catch basket
  • 85 gallon water capacity
  • 3hp seal-less pump
  • 230 volt 3 phase
  • 10kw heater (230v 1ph or 3ph)
  • 10 gauge steel
  • S.S. air shield (door cover)
  • Seal-less ez-load door
  • Steel oil skimmer
  • Dry-floor (waste water) evaporator
  • Power vent
  • Small parts soaking system
  • Large removable basket
  • 1,500 lb. load capacity
  • 41" load hieght
  • 28" turn table
  • 72-0 degree spray jets
  • 45" L x 61" W x 87" H
  • 1120 lbs. shipping weight
  • ETL & C-ETL Listed
Model2085E2085TE
Water Capacity (Gallons)  85  85
Electrical - Motor  3HP  5HP
Electrical - Voltage  230°  230°
Electrical - Phase  1  3
Heaters - 230V 1 PH  STD  OPT
Heaters - Kilowatts  10KW  10KW
Heaters - Fused for AMP Draw  60  60
230V 3PH  OPT  STD
Kilowatts  12KW  12KW
Fused for AMP Draw  40  40
480V 3PH  OPT  OPT
Kilowatts  12KW  12KW
Fused for AMP Draw  25  25
Why Worry About It  OPT  OPT
Gauge Steel  10  10
Stainless Steel Air Shield  STD  STD
Seal-less Door  STD  STD
Oil Skimmer  STD  STD
Dry Floor Waste Water  STD  STD
Disposal System Large Basket  STD  STD
NG / LP (Not ETL & CETL Listed)  OPT  OPT
Load Capacity (Pounds)  1,500  1,500
Load Height (Inches)  41"  51"
Turntable Diameter (Inches)  28"  28"
Number of 0° Spray Jets  72  85
Length (Inches)  42"  42"
Width (Inches)  61"  61"
Height (Inches)  89"  97"
Shipping Weight (Pounds)  1120  1250

 


2000-seriesModel 2175E

Features Include:

  • Dual zone quick service filters with slide out fine debris screen and small debris catch basket
  • 175 gallon water capacity
  • 7.5hp seal-less pump
  • 230 volt 3 phase
  • 24kw heater (230v 1ph or 3ph)
  • 10 gauge steel
  • S.S. air shield (door cover)
  • Seal-less ez-load door
  • Steel oil skimmer
  • Dry-floor (waste water) evaporator
  • Power vent
  • Small parts soaking system
  • Large removable basket
  • 2,000 lb. load capacity
  • 54" load hieght
  • 40" turn table
  • 124-0 degree spray jets
  • 53" L x 78" W x 97" H
  • 2100 lb. shipping weight
  • ETL & C-ETL Listed

 

Model2175E
Water Capacity (Gallons)  175
Electrical - Motor  7.5HP
Electrical - Voltage  230°
Electrical - Phase  3
Heaters - 230V 1 PH  N/A
Heaters - Kilowatts  N/A
Heaters - Fused for AMP Draw  N/A
230V 3PH  STD
Kilowatts  24KW
Fused for AMP Draw  80
480V 3PH  OPT
Kilowatts  24KW
Fused for AMP Draw  50
Why Worry About It  OPT
Gauge Steel  10
Stainless Steel Air Shield  STD
Seal-less Door  STD
Oil Skimmer  STD
Dry Floor Waste Water  STD
Disposal System Large Basket  STD
NG / LP (Not ETL & CETL Listed)  OPT
Load Capacity (Pounds)  2,000
Load Height (Inches)  54"
Turntable Diameter (Inches)  40"
Number of 0° Spray Jets  124
Length (Inches)  53"
Width (Inches)  78"
Height (Inches)  96"
Shipping Weight (Pounds)  2100

 


2060Model 2260 & Model 2260E

Features Include:

  • Dual zone quick service filters with slide out fine debris screen and small debris catch basket
  • 260 gallon water capacity
  • 15hp seal-less pump
  • 230 volt 3 phase
  • 30kw heater (230v 1ph or 3ph)
  • 10 gauge steel
  • S.S. air shield (door cover)
  • Seal-less ez-load door
  • Steel oil skimmer
  • Dry-floor (waste water) evaporator
  • Power vent
  • Small parts soaking system
  • Large removable basket
  • 3,500 lb. load capacity
  • 72" load hieght
  • 52" turn table
  • 168-0 degree spray jets
  • 67" L x 91" W x 126" H
  • 3200 lb. shipping weight
  • ETL & C-ETL Listed

 

Model2260E
Water Capacity (Gallons)  260
Electrical - Motor  15HP
Electrical - Voltage  230°
Electrical - Phase  3
Heaters - 230V 1 PH  N/A
Heaters - Kilowatts  N/A
Heaters - Fused for AMP Draw  N/A
230V 3PH  STD
Kilowatts  30KW
Fused for AMP Draw  100
480V 3PH  OPT
Kilowatts  30KW
Fused for AMP Draw  50
Why Worry About It  OPT
Gauge Steel  10
Stainless Steel Air Shield  STD
Seal-less Door  STD
Oil Skimmer  STD
Dry Floor Waste Water  STD
Disposal System Large Basket  STD
NG / LP (Not ETL & CETL Listed)  OPT
Load Capacity (Pounds)  3,500
Load Height (Inches)  72"
Turntable Diameter (Inches)  52"
Number of 0° Spray Jets  168
Length (Inches)  87"
Width (Inches)  91"
Height (Inches)  126"
Shipping Weight (Pounds)  3200

 

 

The Aaladin Difference:

Aaladin's unique built in waste water disposal system.

The Advantage:

  • You'll save money! Simply flip a switch and evaporate up to 97% of the  waste water through the steam power vent.
  • You'll save time not having to remove and treat all your waste stream.
  • You'll lesson you're environmental impact.

The Aaladin Difference:

Aaladin holds a reputation for carrying the highest quality automatic parts washers in the industry. They're changing the face of the industry with a commitment to quality and integrity.

The Advantage:

  • Your automatic parts washer is built to last, generating a higher return on investment.
  • You'll have less downtime due to unforeseen repairs.
  • You're automatic parts washer won't depreciate as quickly.
  • You'll be able to spend your time building your business, rather than working on repairs, allowing for greater peace of mind.

The Aaladin Difference:

Aaladin's APW's are all built with 10 gauge steel. (Feel free to check shipping weights versus our competitors to compare the density of our machines )

The Advantage:

  • You machine is built to last and stand the test of time!

The Aaladin Difference:

Aaladin's APW's are built with a stainless steel air shield door cover.

The Advantage:

  • This shield will protect your employees from burning themselves on the door.
  • The high quality stainless steal will look great for years!

The Aaladin Difference:

Aaladin's automatic parts washers have a seal-less octagon easy load door. These doors are mounted on half inch hinged pins which are twice the size of most competitors.

The Advantage:

  • These doors are easier to open.
  • They prevent water spillage, providing a safer and cleaner work environment.
  • The design prevents the operator from being to close to the machine when opening the door, protecting them from any potential steam burns.
  • The half inch pins add stability and durability to the door.

The Aaladin Difference:

Aaladin's 2000lbs toggle clamp door latch with non-slip insulated handle.

The Advantage:

  • The insulated handle protects your employees from burns.
  • The latch makes it very easy to open the door, even with just one free hand.

The Aaladin Difference:

Aaladin's belt driven turn table drive, where all drive components are mounted on the outside of the cabinet.

The Advantage:

  • Aaladin's belt design protects the automatic parts washer, unlike internal chain or sprocket drives from grind and wear, prolonging it's life.
  • Aaladin's belt design prevents motor damage if the load were to jam.

The Aaladin Difference:

Aaladin's "Why worry package" which includes an automatic oil skimming system, auto fill, and a two channel digital timer.

The Advantage:

  • Shift intervals can be pre set, just set it and forget it, ready to work when you are, shuts down when you're not.
  • No manual skimming saving you time.
  • Saves energy! It shuts down at end of the shift, commences skimming cycle when cooled, and then restarts before the next shift commences.
  • No oily and greasy mess to clean up.

The Aaladin Difference:

Aaladin's cast iron designed seal-less pumps.

The Advantage:

  • You'll save money on maintenance and servicing not having to replace worn out seals.
  • You'll have less down time due to repairs.

For solutions to all your cleaning and pressure washing needs call our experts today! 778 809 0352